My PunBB-Hosting forum

Unfortunately no one can be told what PunBB is - you have to see it for yourself.

You are not logged in.



  • Index
  •  » News
  •  » content, with sand and fly ash Replace cement

#1 2018-03-13 19:21:53

Registered: 2016-01-17
Posts: 3276
Story Gems: 9,828
Bank: 0
Reputation :   

content, with sand and fly ash Replace cement

<p>and then in the foam cement partition wipe diameter 50, a thickness of 10 ash cake. 6: Will be good to paste a special adhesive insulation board quickly affixed to the wall, in order to prevent surface skin and lose the role of bonding. 7: Foam cement insulation board glued to the wall, the application of 2 meters by foot pressure flat operation, to ensure its smoothness and paste firmly between the plate and the plate to </p>
<p>squeeze tight, no seams, because the cut does not form the gap, Insert and smooth with adhesive. Each sticky finished a plate, should be squeezed out of the surface of the special adhesive removal. 8: foam cement paste should be sub-section from bottom to top horizontal along the horizontal pavement, each row of board should be wrong slot 1/2 board length, the local minimum of not less than 100 wrong slot. Second, the </p>
<p>installation of fixed parts 1: fixed parts in the insulation board after 8 hours to start the installation, and within 24 hours after the completion. According to the design requirements of the location of the hole with a percussion drill, hole 10, into the grassroots wall depth of about 60, fixed anchor into the grassroots wall depth of about 50, to ensure solid and reliable. 2: The number of fasteners set one per board. 3: Self-tapping </p>
<p>cost of patio wood type tiles<br />
composite strip expansion joint cap for sale<br />
cheap waterproofing formwork plywood sheet</p>



2018-03-13 19:21:53

  • Index
  •  » News
  •  » content, with sand and fly ash Replace cement


Board footer

Powered by FluxBB
Hosted by PunBB-Hosting

Bank Lottery Donate